Skip to content

SoftwareBit-perfect

What bit-perfect means

Bit-perfect means your music is played exactly as it is in the file: nothing added, removed or changed on the way.

Music as numbers

A music file stores a recording as numbers: many thousand for every second of music.

How many numbers per second, and how fine each one is, is the file’s resolution. A CD has 44,100 numbers per second, written 44.1 kHz, at 16 bit. An album in high resolution has more, for example 96 kHz at 24 bit.

What a DAC is

The DAC, short for digital-to-analogue converter, is the part that turns those numbers into the signal your amplifier and speakers play.

Bit-perfect means the DAC receives exactly the numbers that are in the file, and turns those, and nothing else, into the signal.

The s1 has its own DAC built in: an ESS Sabre ES9039PRO.

Why it is not a given

Between a file and a DAC sits software, and most of it changes the numbers without telling you. None of this is a fault. The problem is that you usually cannot see it.

Digital volume

When you turn the volume down in an app, the software changes the numbers to make the music quieter. Done well you cannot hear it, but what reaches the DAC is no longer what is in the file.

Loudness levelling

ReplayGain or “normalise volume” makes every track equally loud. To do that, the software changes each track, and it is no longer what is in the file.

A system mixer

A computer, a phone and many streamers pass all sound through one mixer, so that a notification can play over the music. To do that, the mixer converts everything to one fixed resolution, often 48 kHz. A 96 kHz album then reaches the DAC at 48 kHz.

Lossy sources

Lossy formats such as MP3 and AAC, and most streaming services, leave out part of the music to save space. What was left out never reaches the DAC.

Converting DSD to PCM

Some albums come in DSD, the format of the Super Audio CD. Not every player or DAC can play it. One that cannot turns it into the usual format, PCM, first, and the whole recording is changed.

How otoka plays bit-perfect

  • The s1 reads the original file and hands it to its DAC unchanged. No mixer sits in between, and nothing is converted behind your back.
  • Its DAC follows the resolution of each track, up to 384 kHz and 32 bit. It switches only when the resolution changes, so an album plays through without clicks.
  • DSD albums play as DSD, up to DSD512.
  • The volume stays bit-perfect too. On the s1 the knob sets the level inside the DAC, after the file has arrived unchanged. The DAC works with 32 bit, far finer than any recording, so nothing you could hear is lost when you turn it down.

How you can see it

Every room shows a badge next to the format: Bit-Perfect when the DAC receives exactly what is in the file, and DSP, short for digital signal processing, as soon as anything is changed.

Tap the badge and it tells you what is changing the music, and what to switch off to stay bit-perfect.

Sometimes processing is what you want, for room correction or for equal loudness. otoka then calculates with high precision, and it says so.

After the DAC

The numbers are now a signal. From here on, nothing should be added either.

The output stage

The signal that leaves the DAC is very small. The output stage is the small amplifier behind it that makes the signal strong enough for the cable to your amplifier or your speakers.

Integrated, not discrete

An output stage can be built from single transistors, which is called discrete, or as an integrated circuit, with the whole stage on one chip. Discrete stages are often chosen because they add a sound of their own, which means they change the music. That is why the s1 uses an integrated one: what arrives bit-perfect at the DAC leaves the s1 with nothing added and nothing removed.

No sound of its own

otoka plays your music exactly as it is stored in the file. No warmth added, no sparkle, no house sound. If you prefer a different tone, you set it yourself with the room correction and the equaliser, and the badge shows that it is on.

Does it make an audible difference?

Often a small one, sometimes none. A good conversion or a careful digital volume is hard to hear.

But how well music plays is not a matter of belief. It is physics and mathematics: it can be heard, and above all it can be measured. So we do not build on belief or on dogma. We measure, we decide by what we measure, and we show you exactly what we find.

Bit-perfect is the plainest example. It is not a sound but a fact: what you hear is what is in the file.

Still a question?

Write to us. We answer in person, and in plain words.

[email protected]